Simple Control Control Panel

Simple Control Control Panel:

Simply control your Autoterm diesel heater in your motorhome, camper van, or boat with the Simple Control! A simple and very easy-to-use control panel without complex features.

Manually adjust the blower power of your heater by simply turning the knob; it continues to operate without automatically stopping.

To heat your cabin, you can choose from the following modes:

Power mode: Manually regulate the hot air flow.
Temperature mode (with temperature sensor): Regulate the temperature of your heating space by adding a 1458 temperature sensor.
Ventilation mode: Ensures the circulation of ambient air

This model (without adding a temperature sensor) does not allow temperature regulation unlike the Comfort Control panel (AT0050) which has a built-in probe. The Simple Control makes the heater blow more or less by turning the knob, but the heater never stops. Without a digital display, any error codes are indicated by counting the number of LED flashes.

This control panel is compatible with all 12 V and 24 V air heaters.

Different usage modes:

Power mode (if the remote sensor is not connected):

- Designed to heat the space as quickly as possible

- The heater operates continuously at a power level set by the knob

** Temperature mode (if the remote sensor is connected):

- Designed to heat the space to the required temperature

- Heat production decreases as the difference between the desired temperature and the temperature in the space decreases

* Ventilation mode:
- Designed for air circulation in the space

** Ventilation function during heating (if the remote sensor is connected):
- Designed to maintain the required temperature in the space
- Once the required temperature is reached, volume heating stops and ambient air circulation is performed
- Controls the temperature of the space; if the temperature falls below the set point, heating starts in ventilation mode

* Please note that Autoterm heaters with a production date earlier than or equal to 16.11.2016 do not support ventilation mode. You can check the production date of your Autoterm heaters on the warranty card.

** Please note that all Autoterm heaters require an external temperature sensor (1458) so that the "Power mode" and "Ventilation during heating" functions work.

Information: The cable (2067) sold with the heater, which connects the control panel to the heater, measures 1.80 m. We offer extension cables in 3m (4111) and 5m (2468) that you can add between the 1.80 m cable (2067) and the heater.

Usage tips:

For an optimal experience, make sure to install the control panel within reach and carefully follow the installation instructions provided in the manual. The PU-5 allows you to effectively regulate the temperature of your cabin, ensuring constant comfort during your travels.

Compatibility:

This control panel is compatible with the following heaters:
Autoterm Air 2D
Autoterm Air 4D
Autoterm Air 9D

Formerly ref. 3765