Multi-membrane water pump 11.6 L/min WM AQUATEC

The membrane pump from the brand WM AQUATEC allows you to create a water system on board of your camper van or mini van. This water pump starts automatically thanks to its pressure switch and can supply several water points: shower, tap, etc.

Equipped with a 12 V electric system, this membrane pump is installed outside your tank and draws water to supply your tap or shower.

Thanks to the integrated pressure switch, the WM AQUATEC pump activates automatically, no need to install a contact tap!
The pump motor has several membranes, minimizing vibrations and ensuring quiet operation. The pump is also mounted on silent blocks, again to reduce noise.

The pump is self-priming up to 4 m, so it can be installed higher than the water tank. Note that at this height the flow rate will be significantly affected.

Of excellent quality, the membrane pump delivers a flow rate of 11.6 L/min, and comes with Ø 12 mm barbed fittings, straight + 90°, to simplify your installation on board your mini-van or boat. A pre-filter is also provided to limit the passage of foreign bodies.

Made of materials certified for drinking water, the pump is also equipped with an adjustable bypass regulation system. Indeed, if the requested pressure is too low, the pump bypasses, allowing water to pass without turning on.

Note: if you plan to install a water heater, check its compatibility with this pump.

Product highlights

• Flow rate of 11 L/min without pulsation
• Quiet pump
• Adjustable bypass regulation system
• Adjustable pressure switch preset at 2.4 bar
• Dry run resistant
• Drinking water compatible

Technical specifications of the WM AQUATEC membrane pump

• Input voltage: 12 V
• Current consumption: 3.2 A (max. 6A with preset)
• Max flow rate: 11.6 l/min
• Pressure switch: adjustable from 1.9 to 3.8 bar
• Inlet / outlet: male thread 1/2''
• Supplied with Ø 12 mm barbed fittings (1 x straight + 1 x 90°)
• Required fuse: 10 A